Match grade Barreled Action Builds starting at ~ $425

Contains the Following: Tenon Threading to the action being used, Chambering, Chamber polishing, head spacing, Muzzle Crowning Install & Test fire

The Barrel Info (MFG, Twist, grove profile) Date of MFG & the IIW Logo will be laser engraved onto the barrel (Usually on the PORT side)

Barrel finishes are Typically a Machine polish (220grit), Bead Blast or Cerakote (+$100 Single Color)

NOTE: Some builds are not able to be test fired prior to full assembly.

all other machining services available at 30% bundle Discount

Tenon Threading & Chambering ~ $425

Contains the Following: Tenon Threading to the action being used, Chambering, Chamber polishing, head spacing, 11 degree Muzzle Crowning Install & Test fire

Barrel finishes are Typically a Machine polish, Bead Blast or Cerakote (+$100 Single Color)

NOTE: Some builds are not able to be test fired prior to full assembly.

 Muzzle Threading & Crowning ~ $150

11 Degree Crown on threads is the default, Rifle threads are typically 5/8” Long, where as Pistol / PCC / Rimfire is typically 1/2” Long and are all single point cut.

any Cutting to length that is required is included at no extra charge with in reason,

Action Accurizing / Blueprinting ~ $250

Consists of Single-point re-machine critical aspects of action & bolt, alignment and squareness to near zero runout (.0005)

Other options available at a later date - Prices to be determined:

Firing pin Bolt Bushing: Re-machines the bolt face / firing pin clearance to much tighter tolerances

Bolt sleeving: Install custom "sleeves" to keep bolt more concentric with raceway and prevent tilting upon lockup - further improving consistency.

M16 Extractor upgrades: Converts your Remington 700 bolt to a modern, more robust "M16" or "Sako" style extractor. 100% reliable brute force extraction.

NOTE: Requires a breech counterbore of .750” - 0.785”

Side bolt Stop/Release: Convert your Remington 700 to a modern, more robust "Side Bolt Stop/Release".

Bolt Knob Threading ~ $100

Upgrade the measly factory knob with something you can really grab hold of. Removable threaded knob.

Consists of Thread bolt handle, contour and blend for oversized "tactical" bolt knob, Standard is 5/16x24tpi, If a bolt knob is supplied it will be installed

NOTE: If you require non standard threads that must be made note of at the time of intake.

Thread Protector / Index Muzzle Brake ~ $65

If a custom thread protector is required, one will be made in house to fit that specific set up,

If you purchased what is referred to as a “Gunsmith Brake” they usually require lathe work to taper and Index the muzzle brake to your Barrel. Or you already have a brake from another rifle that fits the new one but it doesn’t Quite line up.

Muzzle brake / Thread protector will be finished to as close to the barrel finish as possible.

this service will fix those issues (NOTE: Not all brakes that are being re-used will work)

Hornady Modified Case ~ $25

Drill & Tap for the Hornady / Sinclair OAL Gauges. Either with the Testfire brass or Supplied & Prepped piece of brass. (Standard is 5/16x36tpi)

It’s advised to send 2 - 3 pieces of brass in the rare event one gets destroyed in the process.

Laser Engraving ~ $20

Laser engrave Calibre, Barrel info (Mfg, Twist, Groove profile) & Date of mfg (if known) onto a Barrel.